Multiple water tube, Hot-water boiler. Miura’s Gas/Oil hot-water boiler is a low water content, water tube design, which provides full output within 5 minutes.
Gas/Oil dual fuel burner
Up to 300 BHP per boiler
SpecificationsNote
Specifications
EXW-300 GO
Boiler Type
Natural Gas, Propane, or #2 Oil Fired
Utilization Horsepower
300 BHP
Maximum Pressure
160 PSIG
Heat Output
10,050,000 BTU/HR
Efficiency
80% Gas / 82% Oil
Heating Surface Area
390 FT²
Operational Weight
14,200 LBS
Shipping Weight
12,900 LBS
Width
90 in.
Length
103 in.
Height
138 in.
Combustion System
Proprietary Forced Draft
Ignition System
Electric Spark Ignited, Interrupted Gas Pilot
Power Supply
230, 460, or 575 V, 3 PHASE, 60 HZ
Max. Electrical Consumption
34 KVA
Fuel Type
Natural Gas or Propane (3-5 PSIG) or No. 2 Oil
Gas Consumption
12,562 SCFH
Gas Supply Pressure
3-5 PSIG Natural Gas or Propane
Main Water Outlet
8 in.
Safety Valve Outlet
2 ½ in.
Main Water Inlet
8 in.
Fuel Gas Inlet
2 ½ in.
Manual Blowdown
1 in.
Chimney Diameter (ID)
26 in.
Flame Detector
Ultraviolet Flame Eye Sensor
Overheat Protection
Low Water Cut Off & Flow Switch
Max. Water Temperature
250°F
Full Water Content
148 GAL
Temperature Control
Adjustable Temperature Controllers
No. 2 Oil
87.5 GAL/HR
Fuel Oil Inlet
1 in.
Note
Thermal efficiencies are based on high heating values of fuels at 140°F supply temperature water.
UL and c-UL approved for natural gas and propane.
Gas consumption based on natural gas with high heating value of 1004 BTU/SCF.
All MIURA hot water boilers are fully packaged and test fired at the factory.
Built to meet or exceed UL and ASME standards in U.S.A.; c-UL and B-51 standards in Canada.
